Cleaning car structure and instructions

● Cleaning the car The principle of the cleaning car is to turn the steel wire that can be bent elastically into the blocked sewer pipe by rotating it, and bring the plug cloth, hair and the like out. There is also a tool called a shot pass, which is a pressure relief tool that uses a high pressure principle to open the blocked sewer. This is the principle that is commonly used in life to open up blocked pipes. The pipelines used by industrial pipelines are relatively different from the ones used for the size of pipelines. The pipelines with 100 mm channels are as dredging as household sewers. A tanker truck equipped with a high-pressure water pump cleans the sediments of the city's sewers and clears the sewers. It can also be used for cleaning industrial drainage pipes, walls, etc., and can also be used for watering, transporting water and flushing roads, and can be used for fire fighting in case of emergency.
Product Features 1. Built-in brush roller can be adjusted according to the width and height of the guardrail, and the operation is simple.
2. The microcomputer automatic tracking system is easy to drive and ensures the distance between the car and the guardrail, preventing the guardrail from being pulled down or pulled out.
The cleaning vehicle includes an engine, a chassis, a body, a storage tank, a scrubbing mechanism, a hydraulic control mechanism, a power-variable power take-off device, a hydraulic oil tank, a high-pressure plunger pump, a vertical bracket, and a high-pressure water pump. There is a scrubbing mechanism on the outside of the vehicle body. The scrubbing mechanism includes two pairs of cylindrical scrubbers, sprayers, brushes, retractable sleeve vertical cylinders, horizontal displacement cylinders, balance bodies, oil motors, and hydraulic four-axis gearboxes. . The utility model has the advantages of high work efficiency, safety and reliability, and it can change the hand washing and the backward condition of the railings. It is an ideal clean car used by cities and townships to wash the guard rails.

Working principle Rotate the steel wire with flexibility to turn into the blocked high pressure cleaner car picture water pipe, and bring out the plugging material, hair and the like. There is also a tool called a shot pass, which is a pressure relief tool that uses a high pressure principle to open the blocked sewer.
This is the principle that is commonly used in life to open up blocked pipes. The pipelines used by industrial pipelines are greatly different from the ones used for the size of pipelines. The pipelines below 100 mm are as dredging as the family sewers. A tanker truck equipped with a high-pressure water pump cleans the sediments of the city's sewers and clears the sewers. It can also be used for cleaning industrial drainage pipes, walls, etc., and can also be used for watering, transporting water and flushing roads, and can be used for fire fighting in case of emergency. The high-pressure cleaning vehicle is installed on the basis of the second type of original chassis, and the upper part is a tank body, and a high-pressure water pump is configured to work.
● High-pressure cleaning trucks High-pressure cleaning vehicles are also called pipeline dredging vehicles, which open the blocked pipelines by the powerful pressure generated by high-pressure water flow. The main components are tanks, high pressure pumps, and hydraulic systems. The high-pressure cleaning truck is mainly used for cleaning the sediments of urban sewers and pipelines, the dredging of muds in dead corners, and also for cleaning industrial drainage pipelines, walls, etc., and cleaning roads and square grounds. High-pressure cleaning vehicles can also be equipped with sprinkler devices, green sprinkler guns, front punches, rear sprinklers, and side sprays. They can be used for greening, spraying, dusting, and high-pressure flushing of road surfaces. They can be used for fire fighting in case of emergency.

Operational notes:
First, the requirements of the water source When the high-pressure cleaning vehicle using the river ditch, pond as a water source, pay attention to the suction pipe all submerged. In order to avoid inhaling stones or more sand and drift debris, the suction pipe end is generally provided with a filtering device, and it is forbidden to remove the filtering device during the water absorption. If the water source is shallow, it is necessary to dig up the water absorption area in advance so as to ensure that it does not contain impurities and air.
Second, add water to the centrifugal pump before each water, you must add a certain amount of water to the pump, add water must be closed after the end. When the self-priming pump is used for the first time, it is necessary to add water, and it is unnecessary to add water afterwards.
Third, the water inlet pipe must be vacuum when the water inlet pipe system must maintain a certain degree of vacuum in order to suck water into the box. The inlet pipe system must be sealed reliably, the hose can not be damaged, the hard pipe can not have cracks, otherwise it will have a phenomenon of air leakage, which will result in the situation that it cannot suck water.
Fourth, the parking hook high pressure cleaning vehicle Whether before the absorption of water, or before the operation, the power take-off device must be carried out during parking.
V. Winter Drainage Before the advent of winter, the water in the pumps and pipes should be vented to prevent freezing. The northern part of the country is generally no longer under construction during the severe winter. Therefore, after the construction is completed, the water in the pump and the water pipe will be drained immediately to prevent future problems.
Sixth, regular sewage high-pressure cleaning vehicle storage tank with a sewage pipe, the import of the pipe is the lowest point of the tank. After a period of use, the discharge pipe switch should be opened periodically to remove the accumulated debris from the tank until the water becomes clear.
● Fence cleaning vehicles Also known as pipeline dredging vehicles, road cleaning vehicles, high pressure cleaning vehicles, and sewer cleaning vehicles. The fence cleaning vehicle is mainly used for guardrail cleaning, cleaning of roads, square pavements, sewers, pipeline sediments, dead mud mud dredge, can also be used for cleaning industrial drainage pipelines, walls, etc., city road barriers, roads on both sides of the wall Brushing. The fence cleaning vehicle can be equipped with sprinkler and sewage suction device, which integrates cleaning and suction. Can also be installed according to user needs high-pressure water pumps, water guns, suitable for scouring the city of small advertising and scrub city sculptures.

The use of guardrail cleaning vehicles is used for the cleaning of double-sided guardrails on highways. It can carry out road surface spraying, greening, and fire fighting operations.
Product performance characteristics:
1. Double brush interactive job design, high cleaning efficiency, fast operation, 3-5km per hour.
2. The special design device automatically maintains a constant distance between the cleaning brush and the guardrail board to ensure the quality, efficiency and safety of the cleaning.
3. High-pressure water flow design, high efficiency and water saving, washable fence 5-8km per ton of water.
4. Unique bristles design, cleaning does not leave dead ends, do not scratch the paint.
5, supporting the installation of a variety of car chassis, but also allows customers to increase the price of choice.
6, the use of safety, energy saving and environmental protection, stable and reliable.
● Cleaning vehicle maintenance steps:
Before cleaning, the body surface temperature should be cooled below 60°C, and the ambient temperature should be maintained at 0-40°C. The water gun is more than 15 cm away from the body paint surface. The order of flushing is from the roof to both sides. When rinsing the grille part in front of the car, misty water flow should be used, and the water column should not be flushed against the fins of the water tank or condenser. If the plastic arch cover is installed at the mudguard, it should be removed and cleaned, and the mudguard should be thoroughly cleaned. , Fender inside.
1. It is to clear away the remains of the car body. You can use the all-round descaling water to wipe with a clean cotton cloth. Then wring out the dustless cotton cloth with the car wash liquid, dry the car paint along the direction perpendicular to the car's driving direction. Car wash on the surface. Finally, rinse the car wash thoroughly with plenty of clean water, and dry it with a synthetic sheepskin towel. Wipe dry to achieve the whole car water-free traces, glass without stains 2. High-pressure water gun cleaning, is the use of high-pressure water gun from top to bottom will be contaminated in the body surface of the sand washed away, then rinse the back of the car body, and finally wash the lower part. This step is to pay attention to the need to fully flush the chassis and thoroughly clean the edges, bends, fenders, etc. Particular care should be taken to thoroughly clean the sand and dirt from the wheels, brake discs, fenders, front grilles, door frames, and skirts.
3 is to wipe, use a car wash sponge shampoo car shampoo, wipe the body again, if contaminated objects are not easy to remove, you can repeatedly wipe, pay attention to wipe the body up and down the sponge to be used separately, so as not to scratch the body under the sand paint body paint. Then rinse with high-pressure water, in particular, to clean the seams at the car seams, foam at the corners, etc.
4. Apply liquid to spill the shampoo car wash on the body. There are two methods, one is to use multi-functional high-pressure foam washing machine, spray evenly, to the upper and lower regularly shaking nozzle; the second is manual preparation, that is, according to a certain proportion of shampoo car wash liquid, do not use washing powder, soapy water, Dewaxing detergent.

Xia Gong Chu Sheng (Hubei) Special Vehicle Manufacturing Co., Ltd. Sales Manager Deng

Double beam spunbond nonwoven machines distribute polypropylene(PP) by two dies, which promotes the output of nonwoven fabric. The product of SS nonwoven machine is more suitable for masks, filtering material and so on.


SS nonwoven machine



Advantages of Double Beam Spunbond Nonwoven Line:

1.       The product of SS nonwoven production line has greater intensity, better breathable feature and better feeling.

2.       The output of SS nonwoven machine is larger than S nonwoven machine.


SS nonwoven machine


Main Parameters of Double Beam Spunbond Non-woven Line:

Quantity of Die

Spunbond Unit: 2 set

Effective Width <mm>

1600

2400

3200

GSM<g/㎡>

9-150

Embossing Pattern

Diamond

Oval

*Customizable

 

If you have any question about the nonwoven production line, please contact us directly. We will reply you as soon as possible. We are willing to take you to visit the factory.

 


Double Beam Spunbond Nonwoven Line Series

Double Beam Spunbond Nonwoven Line,Double Beam Spunbond Line,SS3600 Nonwoven Fabric Line,SS2000 Nonwoven Fabric Line

Yangzhou Yuyang Nonwoven Machinery Co., Ltd , http://www.yynonwovenmachine.com

Posted on