Leaders of chemical companies reached consensus on energy-saving and emission reduction

Gu Xiulian, vice chairman of the Standing Committee of the National People's Congress, raised four points of hope. The China Chemical Industry Leaders Forum on Energy Conservation and Emissions Reduction organized by the China Chemical Industry News Agency was held in Beijing on September 16-17. Leaders of 80 leading companies in the oil and chemical industry exchanged advanced experiences in energy-saving and emission reduction and reached a consensus, stating that the company’s tremendous influence in the industry and even in the national economy should be brought into the work of energy-saving and emission reduction, and strive to achieve energy-saving. Pioneer emission reduction. Gu Xiulian, vice chairman of the Standing Committee of the National People's Congress, attended the meeting and delivered a speech, presenting four hopes for the sustainable development of the industry.
Participating in this forum include representatives of domestic companies such as China National Chemical Industry Group, Hubei Yihua Group, Yuntianhua Group, Juhua Group, and Double Star Group, BASF (China) Co., Ltd., LANXESS Chemical (Shanghai) Co., Ltd. Menhas (China) Investment Co., Ltd., Albemarle Chemical (Shanghai) Co., Ltd. and other representatives of multinational corporations in China. They fully exchanged their experience gained in the areas of management system construction, product upgrading, comprehensive treatment of "three wastes", recycling of resources, and high and new technology development. They also expressed that they would learn from each other and promote the in-depth development of energy-saving and emission-reduction work in the entire industry.
Gu Xiulian, vice chairman of the Standing Committee of the National People's Congress, said in his speech that the whole society's concern for energy-saving and emission reduction in the chemical industry is not only a kind of pressure faced by the chemical industry, but also a driving force and opportunity to achieve industrial upgrading and establish a new image of the industry. She put forward four hopes for the sustainable development of the oil and chemical industry: To update the development concept, to abandon the one-sided pursuit of GDP output without considering the cost of resources and the environment, only pay attention to the accumulation of material wealth and ignore the overall development of society, only consider contemporary people. Regardless of the development concept of future generations, it is necessary to optimize the economic structure, strengthen the high-tech industry, accelerate the adjustment of overcapacity products, promote energy conservation and emission reduction, improve product design and manufacturing processes, and rely on scientific and technological progress to support the promotion of energy-efficient products. Major energy-saving project construction provides technical support and assistance for SMEs.
Zhu Jinghua, vice president of the China Petroleum and Chemical Industry Association, and Hao Changjiang, president of the China Chemical News, attended the meeting. The National Energy Research Institute of the National Development and Reform Commission, the Bureau of Industry and Commerce of the National Bureau of Statistics, the Office of the National Climate Change Coordinating Group, and the responsible person of the Clean Development Mechanism R&D Center of Tsinghua University separately predicted the energy supply and demand situation in the country, the macroeconomic operation in the first half of the year, and the annual trend. China’s CDM policy and management, and the Chinese chemical industry’s response to the path of global climate change were addressed. During the conference, the China Chemicals CDM project promotion meeting and the third annual meeting of the China Chemical News Council were held.

IKIA Bike Axle /Spindle

      IKIA axle/spindle is made of steel, it belongs to the drive system, is the core part of bike front/rear hub, it have front axle, BB axle, rear axle. The customers' simple LOGO can be carved on the axle. It have ED, CP, UCP surface.

bike axle


Firstly, we could supply the customer:
1>. All kinds of bike axle, such as, front axle, rear axle etc.
2>. All kinds of lengths' Bicycle axle, such as, 260mm, 280mm, 300mm, 330mm, 350mm, 500mm, 570mm, 590mm, 600mm etc.
3>. All kinds of materials' bicycle spindle, such as, steel, aluminium alloy.
4>. All kinds of packages, such as, bubble bag, polybag, paper bag, bubble bag with card, polybag with card, nylon bag, then carton, carton+woven bag etc.

Secondly, we can supply all kinds Preferential Tariff Certificate of Origin, such as, FORM E, FORM F, FTA etc.

Thirdly, we have CE, ISO9001:2008.

Finally, any OEM and ODM are acceptable and realizable

Bike Axle/Spindle

Bike Axle,Bike Spindle,Bike Front Axle,Bike Front Spindle

Hebei YIJIASHUN Trading Co.,Ltd , https://www.ikiabicycle.com

Posted on