The factors driving the development of small grain dryers in China

The potential market for small dryers in China is huge. China is a large grain country. However, currently the mechanized drying of grain accounts for less than 10% of the total output, while in Western developed countries, the mechanized drying rate of grain is above 90%. We still have a long way to go in terms of the popularity of grain drying. . According to China's grain output of 600 million tons, if 30% of the grain is dried by small mechanization, it needs to be dried 180 million tons per year. According to the small grain dryer capacity of 30 tons per day, it will be dried for 60 days each year. With 10 small grain dryers of this size, it can be seen that the market potential of small dryers is huge, and the demand is on the rise, and the development of small drying equipment is in line with the requirements of market development.

In the past 30 years, enterprises, universities and research institutes in the grain drying industry in China have done a lot of technological innovation and industrial accumulation, and gradually established a set of theory and technology reserves for grain drying that suits China's national conditions. They will be new. During the period, the backbone of developing a new type of small grain dry dryer.

Stainless Steel Investment Casting is our most important products. A&M Manufacturing Co.Ltd.,  has the enough experience to produce. There are two professional branch plants to produce stainless steel precision casting.

* water glass casting: low temperature lost-wax casting process, with capacity to cast products range from 0.1kg to 100kgs. The usually used materials are carbon steel, alloy steel, and stainless steel, high manganese steel, special alloy steel, etc.

* silica sol casting: medium temperature lost-wax casting process, with capacity to cast products range from 0.01kgs to 50kgs. The usually used materials are carbon steel, alloy steel, and stainless steel, high manganese steel, special alloy steel, etc.

Material: austenitic stainless steel ( CF8, CF8M, CF3 and CF3M);

Martensitic stainless steel ( 1Cr13, 2Cr13);

precipitation-hardening stainless steel( 17-4PH).


Stainless Steel Investment Casting

Stainless Steel Investment Casting,Stainless Steel Silica Sol Casting,Stainless Steel Water Glass Casting,Steel And Iron Castings

A&M Manufacturing Co.Ltd. , https://www.am-casting.com

Posted on